Concentrated, non-alum, cationic coagulant.
The cloudier the pool is, the BETTER it works!
Settles suspended particles to bottom for removal by vacuuming.
Works up to 3 times faster than conventional flocs.
FOR USE IN ALL
SHAKE WELL BEFORE USING! Read & follow all label instructions. Adjust pH to 7.5 -8.0 for best results. Remove any debris or chemicals from the skimmer basket.
Apply at a rate of 8 oz. per 10,000 gallons, adding PowerFloc®
SLOWLY through the skimmer.
If you can't see the bottom of the deep end of the pool, double the dosage. Vacuum settled debris being sure to bypass the filter.
DO NOT vacuum debris through the filter.
Readjust pH to 7.2 to 7.6.
Chemically clean the filter with BioGuard® Kleen It® filter cleaner.
NOTE: Sand Filters - put valve on RE-CIRCULATE. Cartridge Filters - Remove filter cartridge(s) from tank & reassemble before adding PowerFloc®.
1 Quart bottle, $21.99 each